Tensegrity Cube

2024-04-01 18:13:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The 2 parts are not the same:
in one there are larger holes to insert the knots into, needed for flat buttom.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/3WOb7py0d7d

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
No
Supports:
Yes

Post-Printing

Use thin, strong string to tie the 2 parts.
Start by adding the short string in the middle, and then 2 "front" / 2 "back" strings.
On then lower side of the strings tie a knot.
On the upper side use crimp beads: you can apply tension and press the beads under tension.
You can tie a knot on the upper side as well, but crimp beads will look better and help with even tension.

crimp beads:
https://www.google.com/search?q=Crimp+Beads