九十式夹具基座HK468用于添加到HK150型号产品上（带有印刷滑轮）
90ged Cam Cleat Base HK468 to add to a HK150 with printed sheave
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a thing to add a Harken Micro Cam Cleat HK468 with a 90° angle to a HK150 Cam Cleat using a printed sheave.
The advantage versus using a HK277 sheave is that the diameter of the sheave is smaller and the HK468 gets closer to the surface it is mounted to. The disadvantage is that the sheave is without bearing and probably wearing faster - to be tested!
You need:
1x The Thing
1x Harken Micro Cam-Matic Cleat - Part number 468
2x M4 30-32mm (fixing 468 to the thing)
1x M4 50mm (axis of the sheave)
4x M4 washer 10mm
3x M4 nuts
2x M5 min 45mm for fixing the thing to the boat (plus washers, nuts etc.)
Use two washers each side of the sheave to reduce wearing.
Thanks for testing - post your makes!
Have fun !!
Tags
相关内容
联系我们
最新模型
-
鬼影2024-05-08 -
鲁格MK IV弹匣底座垫2024-05-08 -
ZOHD Dart 250电池托盘2024-05-06 -
桌面夹板厚度2mm2024-05-06 -
骨架部件2024-05-06
最热下载
-
三维打印可全制作转盘2023-03-26 -
Gyro Air旋转空气模型2023-03-26 -
桌子反面的抽屉2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26
