混乱机械蜘蛛
Chaotic Mechanical Spider by KWYK
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Designed to be a proxy for some chaos spider. This one comes with eight legs.
Supports are included. See printing parameter for more details
Printing:
All part should be upscaled by 2166.133% to be at the proper scale (except for presupported parts).
when you print, try to align the spikes vertically, the longer ones may need one or two support. Be sure to align all part properly to minimize cleanning.
The legs tends to be quite annoying to print and the tube near the mouth are quite delicate.
You may need to add green stuff to hide the seams at the end espetially when gluing the two top abdomen parts.
you won't be able to fit everything on the bases plate in one run, It might take 2 to 4 pass.
The 100 mm base is not provided in the project file but it should be easy to find
Beware that the model is delicate, and spikes tends to break easily. I used a drop of super glue at the bases of the biggest ones.
3D printing settings
I used a quite generous exposure time, the supports can be hard to remove, specially on some areas where I went quite overboard. Anyway, these are located on the lower side, so the visual impact should be minor. Exhaust pipes will most probably break but cleanly so, it will be fine and easy to fix.
edit: added a picture to show some details of the build
If you undertake the printing process and need advice leave a comment. I'll try to improve this description. If you succesfully print it let me know.
Bye!
Tags
相关内容
猜你喜欢
联系我们
最新模型
-
Ender Board 螺丝模式2024-05-08
-
V版鲁比克立方体2024-05-08
-
Delta 36-465桌面圆盘可更换插入物2024-05-08
-
PET瓶盖3D模型设计2024-05-08
-
小型乐高宇宙战舰展示底座2024-05-06
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26
-
可打印骰子塔2023-03-26
-
BF1 单枪手机 08/18型号 Lego2024-03-23
-
浴室排水器2024-04-07
-
厨房水槽滤网过滤器2025-06-05