WS2811僵尸之手2
WS2811 Zombie Hand 2
2024-04-02 08:28:05
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a prop for WS2811 LED lights. It holds 100 pixels.This has been split to fit on a standard Ender 3 bed. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I adjust the Z height on the file to about 7.5mm. Adjust this to what you would like to have for thickness. I have included the xlights xmodel in the download.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Infill:10-15
- Filament brand:
Sunlu
- Filament material:
PETG
Tags
License
CC BY-NC-SA
WS2811 Zombie Hand 2
by jobu109 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
骷髅鸭2025-05-16
-
冷却风扇导管(MK8挤出机)重制版2024-05-08
-
纸张 APC T132024-05-08
-
男法术师2024-05-08
-
HO比例石墙材质2024-05-08
最热下载
-
三维打印可全制作转盘2023-03-26
-
Quansheng UVK6 桌面支架2024-01-10
-
泰坦电视核心升级2024-05-02
-
幻想磁力2024-05-03
-
超越IPD板2024-05-03