Celestron Nexstar 6SE搭配HyperStar系统及摄像头保护罩

Celestron Nexstar 6SE With HyperStar & Camera Cover

2024-04-02 21:29:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Celestron Nexstar 6SE搭配HyperStar系统及摄像头保护罩

Summary

This is not going to be something that is downloaded by probably anyone, but I wanted to share just in case. I am using a Celestron Nexstar 6SE scope with the Hyperstar Mirror attached from Starizona, and connected to the Hyperstar is a ZWO ASI294MC PRO. I wanted the ability to cover the lens when I was done for the night without having to disconnect the Hyperstar and Camera. I made this so I can keep this configuration in place.

I printed in simple black PLA with 0.2mm layer height. I used cura vase mode (Spiralize Outer Contour) and (Smooth Spiralized Contours). Total print time on my FLSUN V400 was 1 Hour 57 Minutes.

Print Settings

Printer brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament brand:
Hatchbox
Filament color:
Black
Filament material:
PLA
Notes:
I printed in simple black PLA with 0.2mm layer height. I used cura vase mode (Spiralize Outer Contour) and (Smooth Spiralized Contours). Total print time on my FLSUN V400 was 1 Hour 57 Minutes.