Masta Blasta 外壳
Masta Blasta Case
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a beefier re-mix of aheathphoto's Masta Blasta case (https://www.thingiverse.com/thing:6509678). I wanted to use the case with my FZ's silicone case, so I added a cutout on the back. I also went with a larger lens that I'm holding in place with a middle insert.
I used a PATIKIL Diameter 32mm Height 10mm Flat Convex Lens from Amazon (https://www.amazon.com/dp/B0BR5PJXVT?psc=1&ref=ppx_yo2ov_dt_b_product_details) and M3 x 12 bolts.
Note: the uploaded version does not include the front cover embossing shown in the photos. I'll probably add that to a future upload after I tweak a few things.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Notes:
You may use supports if you'd like, but I did not find them necessary.
Custom Section




License
Masta Blasta Case
by JuliusG65 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
猜你喜欢
联系我们
热门推荐
-
科幻坦克模型2023-05-25
-
太空矮人三轮车射手(WIP)2023-06-28
-
星球大战TIE战斗机架2023-07-25
-
实验室用电缆固定装置(3D模型),尺寸6毫米2024-03-17
-
60mm镜头保护套,适用于CenterPoint2024-03-18
最热下载
-
钥匙扣2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26
-
3D打印斯特林发动机型号Alpha2023-03-26
-
定制升降装置 1x1型2024-04-21
-
超越IPD板2024-05-03
最新模型
-
386/486 CPU 3D模型提取工具2024-05-08
-
简约置物架2024-05-06
-
Zyn/Chino容器罐2024-05-06
-
科拉多·莫兰娜 3D 模型2024-05-06
-
Honeywell 内部锁机构2024-05-06