Bitaxe超级外壳

Bitaxe Ultra enclosure

2024-04-04 00:46:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This assembly contains a fully closed housing for the open-source ASIC Bitcoin miner Bitaxe ( https://bitaxe.org/ ). The standard Bitaxe Ultra 204 is enhanced by a lager display, a better fan and especially a copper heatsink. As these are difficult to obtain, the process of adapting a generic skiving fin heatsink is explained, please see the given pictures. An excellent thermal flow from the powerful BM1366 ASIC chip to the heatsink is of utter importance, therefore applying a high quality thermally conductive paste between chip and the polished side of the heatsink is mandatory. Furthermore this design features the fan attached to the housing, to avoid mechanical loads and wiggling on the heatsink when assembling the PCB and the housing.
Caveat: The exact positions of the electronic components on the PCB sometimes varies between the different iterations of the Bitaxe Ultra. Also the "standard" 0,96" Raspberry Pi Display differs in size depending on the chosen manufacturer, therefore compare your Bitaxe to the CAD model before you start printing.
If you don´t want to use the copper heatsink, the next best option is to place a 20x20x1mm³ copper shim between the chip and the standard Bitaxe aluminium heatsink. As the given copper heatsink is 15mm high and the stock aluminium one just 10mm there is enough space to also fit in different brands of heatsinks.