Steam Deck欧式插头携带盒配件

Steam Deck Carrying Case Insert For EU Plugs (Europlug)

2023-03-26 19:31:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

A remix from the US Only version at https://www.printables.com/es/model/202185-steam-deck-carrying-case-insert

Original Description

Not so much a remix but a reimagined insert for the back of the steam deck carrying case that winds the USB-C brick cord and neatly tucks it away.

-Holds 4 Full sized SD cards; basically every microSD comes with an adapter, so I plan to hold the microSD cards in the adapters during storage so they are less likely to get damaged。

-Slight press fit at bottom of the SD card slot so they don't fly out when you go to unwrap the charger

-No lid, just wrap the cord around the body of the insert and stick it under the elastic.

-Designed so the cord can wrap clockwise or counterclockwise.

-Supports modeled in so they should break away clean and easy

My Addition

A remix to accomodate the Europlug version of the Steam Deck USB-C Charger into the Deck Case.

As the version remixed from, it still holds the tight and press fit in the bottom and also should accept the US Plug version of the charger. Also keps the ability to be able to fit the charger in a mirrored way.

The only downside is that one closed cavity is lost to accomodate the bigger plug into the inset.

The images might show my printed part a bit rough as I printed it with a 0.3 layer size and at 150mm/s as I thought I would need to iterate the size of the cuts better, but at the end it worked fine at my first try!

Steam Deck欧式插头携带盒配件

朋友，你觉得上面这个模型，属于下面的哪个分类？