巡逻船之河
Patrol Boat River
2024-04-04 22:22:16
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Work in Progress,
An Imperial Guard Version of the Patrol Boat River from Vietnam. Also including two Epic/LI Scale versions with thicker roof structure. I'm not sure if the weapons in these versions are too fine to print them and might rework then later to have less and thicker details.
Regarding the full scale version: You'll need
- one hull (I recommend the waterline Version as this thing should be in the water)
- the driver cab. There's a slot to fix it to the hull
- A front weapon (either gunnnest, mortar or secondary gunnest)
- A real weapon (as above)
- If you use the Mortar in the rear, the mortar shield makes a lot of sense to protect the woanders
Things labeled as LowRes don't need a lot of printing quality. Highest should be printed at best settings to preserve details. MidRes might work either way, depending in what you have at hand.
Improved versions of the weapons, additional weapons etc. Might be added later
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
塞尔达传说全尺寸大剑2023-03-26 -
微USB转换为标准USB 3D模型2024-02-04 -
Geberit 8MM轴型号把手2024-03-25 -
简洁盒子 - Elin2024-04-01
最热下载
-
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
免费蜘蛛侠头像STL模型，适合3D打印2024-03-24 -
Makergear M3 M2喷嘴标签2024-03-27 -
线框无心2024-05-08 -
F1赛船3D模型固定文件2024-05-08
最新模型
-
一体打印行星齿轮2025-07-15 -
指尖把玩2024-05-08 -
适用于Qidi Q1 Pro的额外风扇导气管2024-05-06 -
雨滴罩密封夹具套装（针对Scirocco MK1）2024-05-06
