LED夹持装置用于Croney箱体
LED clip for Creality Enclosure
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of a remix.
The original had the slot for the LED strip too small.
That was remixed to make the slot larger by; https://www.printables.com/model/445163-creality-enclosure-led-strip-cip-remix/files
I found that while i needed the larger slot, the material at the bottom of the slot was too thin and I broke the clips half the time.
I thickened the bottom of the slot and I found that the clip did not need to be so bulky so I made it 5mm instead of 8mm.
In the picture my clip is on the left.
I also smoothed out the ends of the 'legs'.
It now takes only 11 minutes to print one.
Tags
License
LED clip for Creality Enclosure
by jxoco is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
热门推荐
-
esk8电动滑板电池容器电池托盘3D模型2023-03-26 -
isobaric 等压型低音喇叭 V1.0 模型2023-03-26 -
Ritewing 小型Drak 走板螺虫 月光 鼻尖2024-01-19 -
Touptek 2600c 电动 2英寸滤网轮2024-03-20 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05
最热下载
-
Valorant 杰特的姿态2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
模块化笔筒链2025-07-19 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
泡泡底拖鞋2025-07-17 -
关节活动人，假人13,Dummy 132025-07-02 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24