大宇宙系列 Necca 替换活塞片

Neca Atlas replacement piston pieces

2024-04-05 04:35:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are some replacement parts I threw together to repair the Portal 2 Atlas action figure from NECA. He came apart after he was dropped and these tiny pieces were either lost or broke and he couldn't stand without them.

As long as the joint sockets are free of defects, these should work although I only have the one model to test so hopefully it will work well for others if needed.

I printed these on a resin printer with high resolution, washed thoroughly and cured after. The extremely narrow channel in the outer piston is difficult to get clean straight out of the printer, I found the best results came from using a modellers hand drill and a very fine drill bit to carefully clean/drill it out after curing the part. Just be careful, it's rather fiddly!