机械化的恶魔舞蹈自动机器

Motorized Dance devil automata

2024-04-05 05:48:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a motorized version of this incredible thing: https://www.thingiverse.com/thing:4459702

I made it fully automatic with MG90S servo (SG90 variant withh all-metal gears) and ESP32 microcontroller, but You can use Arduino or really any microcontroller. Even servo tester works in a sweep mode! I will post a code example later, but a simple sweep example with added button or switch control will work just fine.

As for the assembly, follow the instruction on a source thing, but use my base and gear base. Then fixate servo adapter instead of rocker arms (I added a nut as a spacer), put servo in its frame, connect the servo to the adapter and bolt in a servo frame (Or just glue it in place). Put controller compartment in the back, wire it up and give it a try, it might need some fixing afterwards. Glue the button in and close the lid.

I made it possible for multiple girls to dance alongside each other. You can connect multiple servos to the controller, print multiple assemblies and connect them with simple M3 bolts from each side (Holes are pre-made). Be sure to remix this thing (Or rather the source thing) if you make a custom head or dress! (I'd gladly do so myself, but my skills are lacking)

WHAT YOU NEED TO BUILD IT:

MG90S/SG90 Servo
Microcontroller or a servo tester
4 M3 bolts with nuts
2 mm shafts (I found 1.5 mm nails working just fine)
An external button (Optional)

I am planning on adding music using I2C and a little speaker, so stay tuned!
Photos will be pinned tomorrow, just files for now

Print Settings

Printer brand:
Anycubic
Printer:
Vyper
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
40-60%
Filament brand:
Eryone, ABS Maker
Filament color:
Wood, Silver
Filament material:
PLA Wood, PETG
Notes:
Supports are needed only for a controller box, for small arms connecting box to the base. You can also use any filament and decrease quality for big pieces.