小型土豆炮

Mini potato cannon

2024-04-05 10:05:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

For this little potato cannon all you will need to do is take any igniter from any BBQ lighter, then insert the two wires of the igniter through the two holes on the side of the cannon. Next wrap a tape of your choice around the igniter to secure it in place. Now that it is in place push the button to make sure there is spark (if not, try moving the ends of the wires closer or further away from each other until you get a spark.) To ensure that the seal around the threads are tight, tightly wrap some tape around the threads. To fire the cannon: put a nerf mega dart with some tape wrapped around it in the barrel till it does not slide out, if you don't have a nerf mega dart you can use anything you have that fits in the barrel. Now all you have to do is spray some hair spray of your choice in the back, then quickly screw the cap back on, now just aim and click the igniter to watch your projectile fly across the room. To print: I used 80% infill and no supports, I printed this in PLA+.