BunkerKings防护王室控制计时器

BunkerKings CTRL Timer

2024-04-05 10:05:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A mount i created to hold a timer to the back of a CTRL loader for 10 man events.
This is the timer i used https://www.amazon.com/gp/product/B01ADY36JY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Not sure if theres others that will also fit but that is the one i bought and used.

Installation:
Youre going to disassemble the whole timer and remove the clip from the back. Keep the screw that you take out as you will be reusing it to mount the back plate to the mount.

Screw the back piece to the mount with the screw you took off the clip

Place the battery into the slot on the back plate

Drop the front face on to the assembly and use the 4 screws to put it back on.
If you ever have to replace the battery you'll need to take off the 4 screws and remove the front face to do so.

To mount it to the CTRL hopper youre going to slide it over the top lid latch. It might be a little snug. Line up the slot and reinstall the top lid.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Notes:
Print the mount on its side so the only support is needs is for the slot and the part that protrudes out.