安卡尔制作 M5C 丝料喂料装置

AnkerMake M5C Filament Feeder

2024-04-05 11:04:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This filament guide was designed to fit over top of either the left or right tower support on the AnkerMake 5MC printer. The "cap" slides over top and the "arm" is inserted into the channel in the cap. Do not glue as the arm fits snuggly and is designed to be moved in or out. There is JUST enough room for the extruder to get past when it is at its most vertical position.

The filament hole can be position in either a horizontal or vertical position to suit your filament/printer setup. You will need a bowden tube collet.

There is a "right" cap and a "left" cap. This refers to which tower the cap fits over, not the side of the opening. The horizontal support on the printer is off-center, so the opening in the cap is also off-center. The AnkerMake logo should face the front of the printer if your orientation is correct.

Print Settings

Printer brand:
AnkerMake
Printer:
Ankermake M5C
Filament brand:
Elegoo
Filament color:
Matte Black and Lime Green
Filament material:
PLA+
Notes:
Supports are not needed for the arm. I used supports inside the cap channel although I'm not certain they are really needed. The pushed right out easily.