通用用途中型和小型资源托盘

General Purpose Resource Tray (Middle and Small)

2024-04-05 17:38:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

First - Disclaimer: This is my very second own design.

This is another tray for all kind of resources in board games like Terraforming Mars,

Wingspan, A Feast for Odin, Wyrmspan and the like.

The holes are smoothed at the bottom for easy(er) access.

I'm mostly a Solo Player (like ≊90%)
and many trays I found were designed too flat to hold enough resources (sometimes on purpose to split even between player counts) for my liking.

The 3 bay big brother (my first design) is good, but I also needed some smaller 2 bay
So I decided to model a different one.

The smaller one first, and used a lot during the winter months, but after that I missed a little extra.
Something in between the big 3 bay and the smaller 2bay
so just a few alterations later the 2 bay big variant came into existence

Print Settings

Printer brand:
Anycubic
Printer:
Vyper
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25%

How I Designed This

Again a very simple Free CAD Design
After the 3 bay brother, I knew roughly how to use Free CAD for simple cutout designs

The 2 bay (small) was done after only a few test prints.
The first one has been a little thin but the second one came out perfectly
I didn't want a stackable version this time, as the stacking part is the most time-consuming one.

After a few months, I decided I needed a little extra.
While playing Wyrmspan, the big wooden resources (like for A Feast for Odin), used up too much space and also the eggs were a little flimsy in the small container.
So I went back to FreeCAD and 10 minutes later I had the 2 bay big version that's the same height but a little longer and wider than the smaller version)