填补Sherman-S防污护罩支架孔洞

plug for holes in Sherman-S mudguard holders

2024-04-05 19:19:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a plug for holes in Veteran Sherman-S wire channel. The can be installed without glue, but you can glue it foe better protection. The model has wire channel, so you can install it on both sides. Finally you need 6 of them for your unicycle.

Print Settings

Printer brand:
Flying Bear
Printer:
Ghost 6
Rafts:
Doesn't Matter
Supports:
Yes
Filament brand:
Doesn't matter, I've used Best Filament
Filament color:
Black
Filament material:
PETG
Notes:
I've set horisontal expansion -1 and build plate adhesion brim. You can cut the brim to make it fit perfectly. Use normal supports to print it.