Nerf 快速发射填补者

Nerf Rapidstrike Gap Closer

2024-03-14 06:45:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

It gave a few Gap-closers for the Rapidstrike, but i wanted some, who doesn't had holes for mounting a picatinny - or directly with picatinny. That's why i construced myself these (they are completely designed by myself, i didn't change anything from others!). The first both - every one is a single side (Links = left, Rechts = right) - are just for normal use, but if you use a worker bodykit for the rapidstrike, take the 2.nd pair - they're a bit shorter, but fit perfectly with the worker bodykit.

these who get some from me said that they're fit perfectly and didn't need to be glued on or screwed with the plate (the last file) from the inside, but i just made that, 'cause on my rapidstrike, they might fall out when you had a hard battle. You can use a short screw (nerf-screws worked fine) if you want to secure it from the inside.

Please respect my work - that's the first thing what i've designed, took me several hours to get them perfectly - and mention me, if you take these and work on them for your needs, thanks.

Print Settings

Printer:
Artillery Genius
Rafts:
No
Supports:
No
Infill:
20%
Filament brand:
Eryone
Filament material:
PLA
Notes:
Just used that filament what i had, so by other filaments or filament - types you might need change settings (depends on your printer). Normally there's no Supports needed when you print them in the right direction (outside on printer bed). There's a "plate" for mounting on the inside - it works with a nerf-screw (3x10) if it doesn't hold itself in place; you can also Glue them in place if you want.