NERF GELFIRE 双持瞄准具升级

Nerf Gelfire Dual Wield Sight Upgrade

2024-05-01 21:44:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The original "sights" on the nerf gelfire dual wields don't have any strong relationship with where the barrel is pointing. I like to aim blasters or at least have an idea where the barrel is pointing, so I wanted to fix this problem.

The file labeled DualWieldSightBead.stl fits snug around the dual wield's barrel after taking off the front face plate. A replacement face plate has also been modeled to keep the barrel from moving during firing (another problem I noticed with the dual wields).

The upgrade kit has resulted in much more accurate and pointable dual wields and takes little time to install.

The front 3 screws on the dual wield that secure the orange muzzle need to be removed and the portion that holds the tips of the barrel should be removed.
Next, the replacement faceplate should be inserted so that the tab with the longer cutout is facing upward and its angled contour matches that of the blaster.
The orange muzzle that comes with the blaster should then be screwed back together.
Finally the barrel and sight bead component should be slid SLOWLY through the hole in the face plate aligned to the barrel. Do not try to force it and adjust the angle of entry to avoid cracking.