管道/导线到旋转器适配器

Pipe/Conduit to Caster Adapter

2024-04-06 05:42:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

An adapter to install stem-style casters into 1" (OD) pipe or conduit.

We have a whiteboard easel that we wanted the ability to roll around, so I created this adapter to install casters into the bottom part of the 1" pipe leg. These casters are leftovers from the cheap stackable plastic storage drawers. These could also be used to build a variety of wheeled carts, desk frames, etc. from conduit.

This adapter is tapered from 0.875" on the top to 0.914" on the base (OD) for a friction fit for our specific easel pipe's (ID). Rigid/EMT conduit is slightly larger (normally 1.04"-1.06" ID {or 1-1/16" to 1-1/32"}), so I would recommend measuring your stock & resizing the *.f3d if necessary. If you don't have the capability to do that, just message me and I would be happy to make the modifications & upload the resized option you need.