怀旧折叠香烟盒

Vintage folding cigarette box

2024-04-06 10:46:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello,

This is a cigarette case with movable shelves. Fill the chamber with sand or lead-like material, as the bottom part needs to be heavy. You will need glue to attach the hinge and bottom chamber.

Assembly order:
1) Fasten the shelves to each other with m2x8 screws as shown in the image. Then temporarily place it on the bottom plate.
2) Close the top cover and make sure that you bring it to a level where you can loosen the screws from both sides with the help of a screwdriver from the mounting hole.
3) Lift the cover, make your markings and glue the shelves to the bottom plate.
4) Attach the cover again and glue the hinge to the back, which you assembled with 2 flat head m2x15 screws.
5) Finally, close the cover and loosen the screws from both sides and place it on the channel.
6) Then you should glue the mass storage after filling it with something heavy like sand or lead.