润滑器超级润滑液（适用于FLSun V400）

Grease Injector Super Lube for FLSun V400

2024-04-06 11:00:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

As you can see in the second photo on my axle shafts, greasing the axles is always a small mess in which far too much grease is applied and even more grease goes wrong.

Whether with toothbrush, brush, fingers, I was tired of it.

On the positive side, the Super Lube already had some injection heads in Thingiverse from colleagues who probably didn't want to break their fingers anymore, so I didn't have to worry about the thread anymore.

In principle, the design works very well, maybe one or the other would like to have a little less distance to the axis, then you might have to grind down 3 tenths or just remix.

As it is now, you can easily edge and see what you are doing.

The cap would have needed a little less air around, it holds, but with a little heating and a few tenths of a second manually bending inwards, it holds excellently.

That was no reason for me to revise the construction, because operating the lighter for 3 seconds and bending the clamping tabs into a perfect position is really no effort.

Print Settings

Printer brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
Yes
Resolution:
0,14
Infill:
no
Filament brand:
Creality
Filament color:
white
Filament material:
PLA
Notes:
I had used PLA because the printers were just fed with PLA.
I recommend PCTG.
Resolution 0.12 to 0.14 will be fine.