TRX6双模扩展适配器

TRX6 Dually Adapter

2024-04-06 17:46:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an adapter I made to use dual wheels on my TRX6. They work very well, allows a (approx) 3mm gap between the wheels I used. Wheels/rims are INJORA 1.9 bead locks. I would think it should work on other brands. You need to buy 4mm thread x 6mm HEX spacer standoffs. I used 50mm long and cut to the right length and re tapped the end I cut off. It needs to be flush on each end and then used a 4mm button head screw to attach the outer tire/rim. I used blue loctite for insurance at both the axle and button head screw. I have also included the un-merged version to allow you to modify as needed for your application.