3D模型合成器改进版
Synth Mask Modified
2024-04-06 20:54:30
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Original model by: DragonArtist15.
I modified this for 2 reasons:
- model was too big to fit on a 220x220x230mm printer bed.
- i changed the antenna to be more accurate to my fursona.
also included is the bolts i made to hold it together, you'll need 6 to fully join this model.
i recommend enabling "z-hop" in your slicer to prevent the model from failing. it does cause stringing but its a good trade off to prevent your model from falling off the build plate.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 SE
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:10% Gyroid
- Filament brand:
Esun
- Filament color:
Grey
- Filament material:
PLA+
- Notes:
these models are modified to print on a 220x220x230mm bed. id recommend using z-hop for smaller printers as it can prevent the model from failing.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
坏龙家的大宝贝女生别下2025-06-26 -
长方形型立体储物架2024-05-08 -
爱你的小茶杯狗2024-05-08 -
后座椅固定销装饰环2024-05-06 -
用于排水渠道的格栅（80毫米）2024-05-06
最热下载
-
桌子反面的抽屉2023-03-26 -
原始控制舱2024-03-25 -
Woods Mower 30922 护盾保持者2024-04-24 -
塑料扣（3D打印无需支撑设计）2024-05-08
