TECHGEAR激活攻击 (M) 轻便外壳底座

TECHGEAR Active Strike (M) Slim case base

2024-04-06 21:52:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a keyboard case for the TECHGEAR Active Strike (M) Slim Bluetooth keyboard.

This is designed to be used as a base for modifications, as this merely clips onto the keyboard. You could easily extend the side of the bigger clip for example and add a phone mount to it, or use this as a base for a keyboard mount as an idea.

I personally made this to be used with the Surface Duo (see remixes).

Print Settings

Printer:
CTC Bizer Dual (MakerBot Replicator Dual clone)
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
60% Hexagonal, 0.2mm layer height
Filament brand:
Enotepad
Filament color:
White
Filament material:
PLA+
Notes:
4 shell layers. Best to print on its side, to avoid making supports (you'd need to remove them fully as this is an exact fit). You may need to lower the bed temperature or the base may slightly disform.

I used approximately 20g of PLA+ for this print.