UK/EU车牌摄像头安装支架

UK/EU Numberplate Camera Mount

2024-04-06 22:07:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a UK/EU numberplate camera mount. This can be used on the majority of cheap reverse cameras available online. It is designed to go behind the numberplate and glue on with an adhesive strip.

I have provided two sizes of thickness - an extra thin one, with a thickness of 1mm which may be more suitable for non-curved front and rear numberplates and a thicker 3mm one, which is more suited to numberplates which are curved!

Print Settings

Printer:
CTC Bizer Dual (MakerBot Replicator Dual clone)
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
60% Hexagonal, 0.2mm layer height
Filament brand:
Enotepad
Filament color:
Black
Filament material:
PLA+
Notes:
4 shell layers. You may need to lower the bed temperature or the base may slightly disform.

I used approximately 20g of PLA+ for this print.

Post-Printing

Step 1

Remove from printer. Allow it to cool off to avoid warping.

Step 2

Drill holes as required, based on the camera mounting.

Step 3

Take off numberplate from vehicle, and glue the mount onto the numberplate (using something temporary like adhesive strips).

How I Designed This

Software

I used Tinkercad.

Tags

License

CC BY-NC

UK/EU Numberplate Camera Mount
by MegaBytesMe is licensed under the Creative Commons - Attribution - Non-Commercial license.

UK/EU车牌摄像头安装支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型