Atom RC剑鱼壁挂 3D模型
Atom RC SwordFish Wall Mount
2024-04-07 00:03:57
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A Wall Mount for your Atom RC Sword Fish, accepts 2 nails but 1 will do, kind of sketch but it holds it just fine.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V2 Neo
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:10%
- Filament brand:
RS PRO
- Filament material:
PLA
- Notes:
Ideally this should be printed on its side as this reduces the chances of the arms splitting across the layers and damaging your model, this however is a nightmare to do and leave a nasty finish, ive printed it with the plate against the build surface and it appears to be holding up just fine.
10% infill works but obviously more is better
License
CC BY-NC-SA
Atom RC SwordFish Wall Mount
by rallota26 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
杠杆棋盘游戏2023-04-14 -
低多边形复古手枪模型2023-06-17 -
小米机器人 XV 型号激光雷达外壳2023-09-08 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
30碟CD/DVD蜂窝式保护盒2024-04-20
最热下载
-
Delta设置校准为Klipper2023-04-23 -
猫咪零食球2024-03-29 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
HGX lite v2支架2025-07-18
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
任意立方体活动关节的一体打印外星人2025-07-19 -
龙珠孙悟空，无需支撑2025-07-19 -
鞋撑2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16