一级潜水器调节机构活塞边缘修复打磨工具
1st stage SCUBA Regulator Piston Edge Restoring Polishing jig
2024-04-07 05:06:40
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Install a 010 Duro 90 O Ring in the top piece.
Lubricate as o ring and piston shaft as required.
Use piston bullet to install through o ring.
Uses AZDental HP 0412 Denture Polishing Kit to polish the inside of the piston. I found that the blunt nosed polisher fits best inside the piston. (See photo).
https://www.amazon.com/dp/B07R8CBR8Y
Final outside polish to be completed by hand.
Print Settings
- Supports:Yes
- Notes:
100% infill on piston bullet. Use a wide brim.
All other parts can be printed at 15% infill with 3 walls and 3 top and bottom layers.
The top piece needs supports. I use Tree Supports on bed only. Print legs up.
Print middle piece with holes up.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi/Odroid C4风扇框架箱2023-03-26 -
线缆整理器花瓶设计-强力版2023-03-26 -
4 CMBG - ASI（军事情报）小队 - ORBAT令牌2024-03-25 -
罗利玩具拖车侧板固定钩2024-04-08 -
动漫角色3D模型：带面具的Animegao Kigurumi v3.52024-04-30
最热下载
-
怪兽大战：1998版2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
Delta设置校准为Klipper2023-04-23 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
HGX lite v2支架2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
泡泡底拖鞋2025-07-17