3dsjs

解放者:地狱潜水者2

Liberator- Helldivers 2

2024-05-02 04:40:52

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Liberator AR-23 Helldivers 2

Note
This is my first time modeling something from scratch, printing, and posting on Thingiverse. This is not a perfect 1:1 model, but I did my best. I will answer any questions and would love constructive criticism and or feedback.


Trigger Housing

This is a modified housing from the "Helldivers 2 P4 Revolver functional prop" by CosmicForge

The fit into the handle is snug with my printer, may be necessary to scale down slightly if problems arise for you specifically.

For it to function they recommend the following, however the model is slightly scaled up from the original. I used an imperial bolt and cut it to fit.

-(1) M3 x 20mm bolts

-(1) ¼"x7/8" extension spring


Magazine and Body C

-(4) 6x3mm magnets


Charging Handle

I originally designed it to be spring-loaded, however, it was a pain to set up in such a tight space. For simplicity, I removed the spring mechanism and left it to slide freely. If there is anyone interested in the spring version, I could post that too. Just make sure to place the Handle inside before you start gluing pieces together.


Scope

The scope was intentionally designed to slide with plenty of clearance for easy removal or gluing. If you are interested in a snug fit, try scaling down ~1-2%, though I have not tested this.

Print Settings

  • Printer brand:

    ELEGOO

  • Printer:

    ELEGOO NEPTUNE X

  • Rafts:
    Doesn't Matter
  • Supports:
    Yes
  • Resolution:
    .2
  • Infill:
    10-15%
  • Filament brand:

    ELEGOO

  • Filament color:

    Black

  • Filament material:

    PLA

  • Notes:

    I recommend supports on all pieces.

Tags

解放者:地狱潜水者2
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15