酷炫冰棒模型

COOOL ICE STRAW!

2024-04-07 05:49:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This here is the one of a kind, super cool (pun intended) ice straw!!! The ice straw itself is a massive and above average over 7 inches long! Remember, this is just a straw nothing else.

How it works is you first print out the mold and the cap in some sort of flexible filament, (I used TPU). Then cut some nonprinted filament off the spool and thread it threw the mold and cap (the seal should be just tight enough to let no water threw). fill it with water, cap it, stretch the filament straight, and let it freeze! once its fully froze, run some hot water over it and squeeze it out from the back. then get to sucking.

would love a tip if you can spare it!!!(:

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30
Filament brand:
ninja flex
Filament color:
grey
Filament material:
TPU
Notes:
no supports, super easy print in place. though you may need to go extra slow because of how tall the ice straw mold is. PLEASE LET ME KNOW IF SOMETHING IS NOT SEALING RIGHT FOR YOUR PRINTER AND I'LL ADJUST IT THE BEST I CAN (: