3D建模参数化网格无限系统

Parametric gridfinity bin magnet jig pressfit

2024-04-07 08:42:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the original gridfinity glueup jig with smaller magnet holes so you can press-fit them.

You will also need to print one of the bases from the original Gridfinity Bin Magnet Jig.

For fitting the magnets use a tool like the Gridfinity Friction Fit Magnet Jig (Palm handle remix). As the magnets need to be inserted into the carrier from the bottom, be sure to use the "bin" version of the jig.

Acknowledgements

My design is based on Gridfinity Bin Magnet Jig by gsgx. It is an accessory for gridfinity which was created by Zack Freedman.

Thingiverse

https://thingiverse.com/thing:6567737

Github

https://github.com/nomike/Gridfinity-Bin-Magnet-Jig-Pressfit

Instructions

Nothing special.

Instructions

Nothing special.

Tags

gridfinity openscad parametric

License

Parametric gridfinity bin magnet jig pressfit
by nomike is licensed under the GNU - GPL license.

3D建模参数化网格无限系统

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

布恩小恐龙：阿尔洛撕齿兽UpKit - 3DKitbash网
2023-03-27
吸血鬼之夜
2024-01-15
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口
2024-02-05
Arduino或5V继电器控制板固定架
2024-04-02
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座
2024-04-29

最新模型