WS2811 恐怖变身克劳尼人
WS2811 Pennywise Clown
2024-04-07 09:25:33
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a prop for WS2811 LED lights. It holds 141 pixels.This has been split to fit on a standard Ender 3 bed. I would recommend printing this out of PETG or ABS to make sure it holds up to outdoor temps. I would not recommend using PLA. I adjust the Z height on the file to about 7.5mm. Adjust this to what you would like to have for thickness. I have included the xlights xmodel in the download.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Infill:10-15
- Filament brand:
Sunlu
- Filament material:
PETG
Tags
License
CC BY-NC-SA
WS2811 Pennywise Clown
by jobu109 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
原神优菈2025-06-27 -
Rancilio Silvia 58mm Portafilter Hook2024-05-08 -
blink门铃钥匙2024-05-08 -
熊王2024-05-08 -
圣诞主题旋转木马2024-05-08
最热下载
-
精灵族森林守护者A2023-03-26 -
沃帕尔六足行走机器人2023-03-26 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
FFBeast仿真飞行器模拟轮部件2024-04-19 -
街用迷你四驱车轮子2024-05-01