埃克索滑动赫默拉镜像版（赫默拉安装高度优化，专为Revo系列设计）

Exoslide Hemera Mirrored (Hemera mounts higher for Revo)

2024-04-07 10:23:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a mirrored remix of the original Hemera ExoSlide mount. This allows for full use of the print bed and Z height when using the Exoslide mod with Hemera Revo on an Ender 5 Plus.

I was having issues with my fan shroud and bltouch crashing into the print bed mounts, forcing me to reduce my overall bed size. This modification allows the fan shroud and bltouch to have clearance by raising the extruder about 14mm. I now have full use of my print bed!

You will need to relocate one of the captured nuts from the bottom left to the top left. I also had to remove the belt mounting bracket from the top of the extruder ExoSlide in order to properly tighten the bolt. You will be unable to reach the bottom left mounting hole of the bracket.

This may not work for non-Revo Hemera's, as the nozzle is higher and it may cause your bed to crash into the upper bed rail supports. It is not compatible with HemeraXS