浮动式雨水收集装置

Rain barrel floater

2024-04-07 16:28:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a floater for rain barrels. It is supposed to be filled with sand to increase its weight. The top can be connected with a string to the hatch of the pipe of the rain gutter. Once the water level of the rain barrel sinks to a certain level, by for example using the water for watering the plants in the garden, the floater will pull open the hatch and water will run into the barrel again. Once the water level has risen again, the floater will automatically close the hatch again, preventing the barrel from overflowing with water.

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1mm
Notes:
Flip the lid upside down.

Supports are only needed for the bottom of the floater, to prevent it from falling over.

License

CC BY-NC-SA

Rain barrel floater
by GeilerGelber is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

浮动式雨水收集装置

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

经典Laverda钥匙链车锁
2024-03-17
28毫米战争游戏激光步枪架（FDM友好）
2024-04-04
Lian Li O11 Vision LCD Holder Sensor Panel
2024-04-07
公主Stencil 6
2024-05-01
Aarke饮品二氧化碳平台：外部CO2连接解决方案
2024-05-05

最热下载

最新模型