3dsjs

Flex Innovations RV-8 60E浮动支撑

Flex Innovations RV-8 60E Float Mounts

2024-05-04 05:30:00

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Flex Innovations RV-8 60E Float Mounts - The mounts are to strengthen, and make reliable, the mount locations on the floats for Flex Innovations RV-8 60E, and Cessna 170 60E

Problem: The wood mount locations get infiltrated with water, weaken, and break.
Solution: Epoxy these mounts over the stock mount locations.

These mounts are designed to use metal thread inserts and screws to secure the mounts to the wire struts. You will need to get a Heat-Set Insert Tip - for Thread Inserts to install the thread inserts into the plastic. The insert tip replaces the tip on a soldering iron and is used to heat the inserts and securely embed the threaded insert into the plastic.
I used M3 Screws and threaded inserts.

Instructions
-Print the mounts. 2 front, 2 rear
-Install threaded inserts
-Dry fit on floats. Sand and prep the wood on the floats as needed.
-Once a good fit is attained, apply 5-min epoxy, fit and align the mounts onto the floats.
-Once dry, attach to the wire struts and secure with M3 screws.

Materials I used:
--Heat-Set Insert Tipshttps://www.amazon.com/dp/B0CDBSGSXY
--Ruthex M3 Threaded Insertshttps://www.amazon.com/dp/B08BCRZZS3
--M3 x 12MM Hexagon Socket Head Cap Screws
https://www.amazon.com/dp/B0895PBFFJ

Print Settings

  • Supports:
    No
  • Filament brand:

    Your preference

  • Filament material:

    PETG or ASA

Flex Innovations RV-8 60E浮动支撑
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15