缝纫计数器

Stitch Counter

2024-04-07 17:42:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Stitch counter for knitters!

Tried to print models that others have created, but they didn't work for me... so I had to make my own :D

This one is tight enough not to roll on its own (when placed in purse etc.) and loose enough to roll easily without force. Easy and fast to use, numbers 'click' nicely in place when rotated.

After printing I did a little sanding on the tube edges + sprayed some CRC Dry Lube to surfaces that are touching each other when numbers are rolled.

When assembling parts together, you might think it's little 'too tight'. Trust me, it's better that way than too loose. You want to use just enough force when putting those parts together and they will 'click' in place. (Sanding and Dry Lube helps.)

Counter is meant to be carried along by putting a knitting needle through it (you can edit that hole smaller or bigger) but I also included little handle that can be glued on the side.

Please notice that I made a lot of little adjustment to get this just right.
When you are using your printer and your filaments, you might need to make those little adjustment too. So be prepared to that.

There is also STEP-file attached for you to work with.

Pastel violet parts are printed with Sunlu PLA meta.