红海珊瑚垫500双层底板

Red Sea ReefMat 500 Basket Double Floor

2024-04-07 18:26:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I am using Red Sea carbon in the basket under the ReefMat 500. If the bag with carbon utilises the full basket, this slows the flow of water so much that the ReefMat filter utilisation goes way too high, and filter roll is used in a couple of weeks tops!
The double floor allows utilisation of ~40% of the basket volume to be used by carbon, and still pushes carbon up to the filter exhaust, thus forcing all the water to go through the carbon, and not to escape through the side holes.
Yes, you could put some "noodles" under the bag and achieve similar results, but I just did not have any noodles handy when I figured out what is causing excessive use of the filter roll.
Please make sure you are using the material that is both waterproof but also will not poison the fish! Most of PETG will be ok. Most of other mainstream materials not...

Print Settings

Printer brand:
Prusa
Printer:
Prusa XL
Rafts:
No
Supports:
No
Filament brand:
eSun
Filament material:
PETG
Notes:
Make sure the double floor is printed upside-down (see the photo), to avoid the need for support!