红海纳米过滤器

Red Sea Nano Skimmer, 2nd Filtersock, Overflow Extension and Cover

2024-05-02 11:18:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Do not print RectSkimFull.stl ! Its just to view the thing as a whole, the top cup needs to be separate, print it in parts only !

Protein skimmer for my Red Sea Nano desktop. It's a mame skimmer, so needs an external air pump and a bubble stone ( very fine bubbles work best).

I have a cold water reef tank so need to reduce any additional heat and don't want a skimmer with internal pump. But mame skimmers work great in general, are low maintenance and very quiet.

I made 2 versions, a standalone and one that has a holder for a 2nd filter sock ( or filter upgrade).

The standalone has also a holder to adjust height, but it turned out the water level was just perfect for my setup without when just sitting on those foam rails on the bottom.

The one with the 2nd filter sock should be used with the 2 overflow extensions. The water will go into the 1st filter. If that one is clogged flow over into the 2nd ( so it's a backup solution not a 2 stage filter). The tiny overflow extension goes into the corner of the first filter holder, there is that little emergency overflow hole that I wanted a bit higher.

Both versions are 3 parts so they can be printed on a smaller printer like my MK3s

The covers are for my tank specifically and the way I have cables and lights, but might work for yours as well. You definitely want some kind of lid on the skimmer, I just don't need one because the cover does that job.

I use PETG for all my reef prints because its food safe, but I read ppl also use PLA and ABS without issues.