光丝防潮盒（K1最大型号）

Filament anti-humidity box for K1 max

2024-04-07 20:53:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

An anti-humidity box to contain several rolls of filament.
There is a small pocket at the bottom for silica gel balls.
In my first design, I created only one hole for the filament to exit. However, since it was quite difficult to place the box, I revised the model by adding a straight line to the hole. You can see its old version in the pictures.
I believe that some of the heat generated by the printer while it is running remains inside the box, which keeps the filament dry.
It can be printed with support.
Creality CR Petg was used.
Printed at 240 degrees, 120mm speed.
It took 6 hours and 38 minutes.
A total of 261 grams were consumed.
The material thickness was set to 2mm. You can find other dimensions in the images.