3-pin入口模块盖

3-pin Inlet Module Cover

2024-04-08 00:48:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was building an arcade cabinet and fitted a 3 pin inlet module, however the inside was exposed, even with heatshrink/rubber covers etc it didnt fee super safe so I designed this cover.

Theres two types of case included, the full one but will need supports and I dont like supports personally so did one with a clip on cap too. Both are the same size. Obviously you only need to print the full one or the body & lid.

Its 50mm tall so the internal wiring needs to be lower than 50mm, which is only an issue for the loops that go to the switch. The screw holes are for 3mm countersunk screws.

I've included pics of the item I used, they are very common so shouldnt be much different between them. They dont actually interface together as such, the inlet module screws in on one side, and my case screws in on the other with a few mm space.