Schumacher Cougar经典橡胶电池固定架

Schumacher Cougar Classic Oring Battery Mount

2024-04-08 01:02:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume the kit wood screws will be fine but I had already replaced with M3 10mm bolts.

You will need a 2mm oring, anywhere between 55 OD to 61OD will be fine. I'd personally recommend 55 if you plan to use a low profile battery and 61 if you want to use a normal shorty. Both will work fine to be honest.

I'd recommend printing with 30+ percent infil and PETG or ABS. I wouldnt trust PLA not to warp when it gets warm in the shell, although theres no hot motor in the shell so might be ok.