真空线支撑架

Vacuum line brace

2024-04-14 16:20:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed to replace my vacuum lines and when I looked at the OEM part it was crazy overpriced and unnecessarily proprietary. This print allows you to use off the shelf parts shelf, standard hoses and TEE connectors to replace the proprietary and expensive OEM part with easy to replace an off-the-shelf parts. Add this brace to provide the strength needed by plastic Tee's and if printed in high temp materials it should provide a solid, affordable solution. Use zip ties fitted to the slots for easy removal/replacement.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
.28/200 mm/sec
Infill:
40
Filament brand:
Overture
Filament color:
Space Grey
Filament material:
PETG
Notes:
Print however you like as its a strong part either way but I used rectilinear for everything and 40% cubic for infill, 5 walls. took 40 minutes.

Tags

teereinforcment teesplitterbrace vacuumline vacuumlinebrace

License

CC BY-NC-SA

Vacuum line brace
by bdavid01 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

真空线支撑架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

盖子和汽油喷嘴
2024-05-08
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus
2024-05-08
RIBBA 设计灵感
2024-05-06
DJI动作4防震支架艾沃克 F5/F6
2024-05-06
弗雷德锁骨
2024-05-06

最热下载