Schrader尘盖移除工具
Schrader dust cap removal tool
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
After trying to remove the dust caps to check the pressure in my car tyres I designed this removal tool.
The tool is a 'print in place' item which allows you to eject the cap once the cap is removed in case you want to remove more than one cap at a time.
In my case the wheel design made it almost impossible to remove the dust cover without a struggle.
Possibly because the valves have pressure sensors inside the alloys and short valve stems.
Print Settings
- Printer brand:
Creality
- Printer:
K1
- Rafts:No
- Supports:Yes
- Resolution:.2
- Infill:15%
- Filament brand:
Polly Terra
- Filament color:
Any
- Filament material:
PLA
- Notes:
Just a quick clean off any loose bits of filament and you're good to go.
The pusher part stays inside the tool and then pops out the end when the cover is fully inserted.
相关内容
联系我们
热门推荐
-
Apex 5 FPV 90 fps HDzero摄像头适配器2023-03-31 -
手提袋受Pikachu启发2023-05-04 -
Peugeot 2008 iPhone Magsafe Holder2023-06-19 -
车用干燥风扇盖2024-01-16 -
兰博基尼全新品牌标识2024-04-01
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
HexiBox 唐氏 W3-2141 书架式扬声器2025-06-17 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14 -
CZ455 452 512 弹匣底板2024-04-22 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
尼琳替换式烤架2024-05-08 -
魔法未来2021配件 - 卢卡与连2024-05-08 -
E3D固定座适用于Prusa Mendel2024-05-08 -
史蒂夫·弗瑞机器人飞行器脚部与腿部组件更新版——来自《静默的运行》2024-05-06 -
MK2 扬声器保护罩2024-05-06