罗恩斯坦插头至施拉德阀门适配器
Ronstan Plug to Schrader Valve Adapter
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I wanted to do a pressure test to see what could be leaking on a sunfish we picked up so I designed a ronstan drain plug to schrader valve adapter. Hooked up my air pump and it worked great.
When it comes to pressure, less is better, you only need less than 1 pound of pressure. Don't blow your boat up.
You can use your ronstan plug washer, or print the included washer file in TPU.
Print Settings
- Rafts:No
- Supports:No
- Notes:
I used .2mm layer heghts, place the ronstan end down on the printer bed, then I did variable layer height settings to print the schrader valve portion at .1mm.
Tags
License
Ronstan Plug to Schrader Valve Adapter
by vertigo235 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
Huksi 角型夹紧器 90º2023-03-26 -
平滑的脑科学奖2023-03-27 -
本杰明·席可2023-05-03 -
黑武士2游戏手柄改装及配件分离2023-08-23 -
保时捷968型号前置和（敞篷）后置 4英寸扬声器支架2024-03-23
最热下载
-
Delta设置校准为Klipper2023-04-23 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
Dado - 立方体模型2024-03-24 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
弹弓HGX-FRAME V1A2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
3d打印的男人凉鞋2025-07-17 -
高跟鞋鞋架2025-07-17 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24