Victorinox 铅笔套装 3D 模型

Victorinox Tweezer Sheath

2024-04-08 01:32:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I like to carry a swiss army knife with me everywhere I go - except on planes.
Most of the tools (apart from sharps) are ok to replace with other options, but I do like the little tweezers. However, they get easily lost on their own.

And so I designed a little sheath/holder for tweezers, to make it easier to carry them without the knife. You can buy packs of spare tweezers really cheaply, so I just leave the one in the knife where it is. Putting it in the sheath makes it much more visible, and there's a little hole so you can put it on a keyring.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm layer height
Infill:
20%
Filament brand:
Pinuotu
Filament color:
Translucent Blue
Filament material:
TPU
Notes:
I'm sure it would print absolutely fine in PLA/ABS/PETG etc, but I happened to have some TPU loaded and thought it would look cool, and it printed so well! It was really cheap too, might buy some more of the stuff...

Obviously DO NOT add supports. It's such a small bridge that it will print fine as it is, removing supports would be impossible.