Cute Penguin with Scarf and Beanie Hat

2024-04-08 03:28:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is a cute penguin model that can be painted and used with the AMS or any multicolor system! It looks nice printed in a single color as well. Use Orca Slicer or Bambu Studio to open the provided 3mf and see my modifiers. Alternatively, use the STL and read my recommendations below.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
15-25%
Filament brand:
Bambu Lab
Filament material:
PLA
Notes:
This model works best when you use a modifier to make the infill at the front 25% and the infill at the back 15% (for balance). The 3mf provided is openable in Bambu Studio or Orca Slicer and will already have this modifier. To be clear, I have printed the model entirely in 15% infill and it does stand, but it is easy to knock over.

Tree supports are required for this model as well.

I recommend using fuzzy skins on the ball at the top of the penguin's hat for a cool effect.