微型SD卡存储器配备笔记功能
MicroSD Card Holder with Note
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Holder for 1 MicroSD Card with a note.
Took inspiration from a couple of other designs and made some adjustments.
There should be no need for supports. I print this with 5% infill, as there is not much strength needed for the print.
The cutout on the holder is 11mm, and the space underneath on the tray is 12mm. I use this to print a 1/2inch Brothers label and stick it to the tray, the cutout on the window then slightly captures the top and bottom edges to help prevent accidental lose.
A microsd card should snap into the card cutout with ease, and then you can use your nail to lift it back out.
The holder should snap snuggly into the tray. It can be lifted out with the tab if needed.
Print Settings
- Rafts:No
- Supports:No
Tags
License
MicroSD Card Holder with Note
by mike_e_allen is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
飞行模拟器简易脚部2023-03-27 -
斯特里博斯蝴蝶锁支撑结构2024-01-02 -
Panasonic Lumix GX8 前置旋转环2024-03-21 -
魔杖2024-05-06
最热下载
-
Glock 17/34 Solidworks 模型文件2023-04-21 -
Dado - 立方体模型2024-03-24 -
盐湖插入整理器2024-04-13 -
GTA 5 大地图模型2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
罗技K400键盘壁挂式支架2025-07-27 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
3d打印的男人凉鞋2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26