42×42步进电机安装支架
42x42 stepper motor mount on flat surface
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Mounts for stepper motors with 42x42mm front section (fit for NEMA).
This is a custom design I needed for a specific DYI project (intended for mounting on a flat surface), however I publish them here in case they fit anyone else's purpose.
There are 2 versions, one with a short base and another with a longer footprint.
Mounting screw holes are 10-15mm ovals to allow position adjustment on 2 axes, vertical and along the shaft.
M3 screws for tightening the motor, M5 or M6 screws for mounting on surface.
Motors stand on rails allowing better airflow for cooling. If you expect the motor to become hot during operation (higher load), print in temp-resistant materials e.g. nylon, ASA or at least PETG.
Tags
License
42x42 stepper motor mount on flat surface
by crio333 is licensed under the GNU - GPL license.
相关内容
联系我们
热门推荐
-
Charnières platine Gemini SA 600 II车身部件2023-03-26 -
Ende3 Pro 调整轮子 42-40 步数电机升级2023-05-30 -
管型加热装置二号2024-03-17 -
Floddder欢迎在Zonnedael桌上2024-04-03 -
南斯拉夫纪念碑——伊里日卡·比斯特里察2024-04-22
最热下载
-
Dado - 立方体模型2024-03-24 -
Apple鼠标 - M0100 3D模型2024-03-25 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03 -
GTA 5 大地图模型2024-04-21 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
性感美女3d人像（带基座）2025-07-17 -
鞋带锁2025-07-17 -
天使和恶魔2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16