金属货架

Lee Die Shelf

2024-04-08 11:28:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Stackable Shelves made for Lee (and possibly other) reloading dies. I glued them together, that's not required. I also added rubber feet on the bottom shelf to keep it from moving. I used small square tabs that fit into the shelf above. These tabs provides centering , will keep it together if you don't want to glue, and more surface area for glue if you do want to glue. Hole on bottom is 3x3mm, tabs are 2.8x2.8mm. Testing found that worked best assuming you have appropriate 1st layer height.

Note that for the top shelf the holes are shallow (because I didn't want the holes all the way through the shelf). The shelf is 3mm thick, the holes are 2mm, while the tabs are 5mm high so you will need to snip off the majority (~3mm) of the skinny square tab on the shelf below the top. Don't snip off all, they still providing centering support.

Will fit items:
127mm (w) x 42mm (h) x 142mm (d)