宏伟设计22MLE拖车储物箱小伙伴

Grand Design 22 MLE Trailer Cubby Buddy

2024-04-08 11:42:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a small shelving system for the bedside cubby holes in the Grand Design Imagine XLS 22 MLE travel trailer. There are stand-off's on each end to provide a large vertical space for tablets, iPads, etc., and on the other end to allow access to the 120V duplex outlet. The large square is designed to hold a cube of facial tissue. There is also a friction hook designed into the rear of the lower large block to hold charging cords as they pass through.

It's designed in four blocks that are printed separately (though I was able to combine block 3 & 4 on the same print bed), and then cemented together with All-purpose plastic cement. There are eight (8) files; 4 blocks for each side (Driver and Passenger.) There are also four mounting tabs designed into the "Cubby Buddy". I recommend test fitting the finished structure and then shimming the mounting tabs as necessary with washers to achieve a flat mounting against the back cubby wall. Do NOT use greater than 3/4" screws to mount this. (I used 1/2" screws to good effect.)

Print Settings

Printer brand:
BIBO
Printer:
Bibo 2 dual
Rafts:
No
Supports:
No
Resolution:
Normal (200 micrometers)
Infill:
30%
Filament brand:
Hatch Box
Filament color:
Black
Filament material:
PLA
Notes:
I printed this using my standard 190/50 settings; 190C extruder temp, 50C bed temp.